Step-by-step instructions on how to trim a machine at home

Send

Haircut by machine helps not only to save money from the family budget, but also gives you the opportunity to discover the talent of the master, as well as experiment. Moreover, you no longer have to sit in long lines at the hairdresser. If you learn home hairdressing, you can even open your own home salon and cut family and friends. In addition, the machine for cutting the house can be bought cheap, while it has a lot of advantages. However, in order to become an experienced hairdresser at home, you need to know what the haircut technique implies for beginners. Lessons and tips are simple, so go for it.

What do you need for a male haircut at home?

Before proceeding directly to the process, prepare the following:

Actually, a clipper. And it is not necessary to buy expensive professional. Houses fit ordinary household from the mass market. They are produced by almost all firms that produce small appliances: Braun, Rowenta, Philips, Panasonic, etc.
Hairdresser's scisors. Pay attention that they are well sharpened. You can check the sharpening like this: cut a piece of cotton wool. You can't do it with dull scissors.
Comb with frequent teeth.
Cape on the shoulders. You can buy a special one, and you can use household tools at hand - a towel, oilcloth, etc.

Step-by-step homemade haircut instructions for beginners

Haircut lessons begin with preparation. First, wash your hair and dry your hair. This should be done to sebum is not clogged in the tool knives. If you have purchased an expensive typewriter for your home, you can also cut wet curls. But if you are the owner of an ordinary machine of average cost, it is better not to risk it - wet curls will dull the blades very quickly. There is also a possibility that the machine will slide off on wet hair, which can lead to irritation and even injury.

In general, for the most simple male haircut at home, you do not need special skills, just install the desired attachment and go all over your head. For a haircut at home, similar to the salon, will have to work a little.

Step 1: divide the curls into zones. Conditionally divide your head into 3 zones. So you get the occipital, temporal and parietal parts.
Step 2: Take the typewriter and the nozzle with large ridges (for example, 15 mm). To correctly determine the desired nozzle, first read the instructions - it indicates how much each leaves. Take the machine in hand, hold it with blades up. Always start the procedure from the back of the head. Begin to cut from the head, from the hairline. Rise to the temples and finish on temechke. The machine should be moved against the growth of hair, very smoothly and slowly. Avoid sudden movements. Do not forget in the process of comb - comb them curls.
Step 3: Put on the smaller nozzle (9-12 mm). Now go for a machine on the temporal and parietal lobes again. Open the secret: to get a smooth transition on the back of your head, press the machine close to the head at the beginning of the back of the head, and rising higher, increase the angle between the nozzle and the head, aligning the transition.
Step 4: Install the small nozzle (6 mm). Swipe the machine again at the temples and lower part of the neck, while combing the hair in different directions.
Step 5: Remove the attachment and remove excess vegetation. With a machine without a nozzle, you can trim the hair on the neck and sideburns, as well as above the ears.
Step 6: Align the bangs. To do this, use a scissors and a comb.
Step 7: Check the result. Carefully look in the mirror: have you missed strands and is there a uniform length? If the hair is sticking out, go through the machine again or trim it with scissors. If you accidentally get hurt while cutting at home, apply aftershave lotion on your head - this will prevent irritation.
Step 8: brush the hair off the machine. If possible, it is advisable to lubricate the blades with oil after each haircut at home.

Now that you have mastered homemade haircuts, you are ready to experiment. Believe in yourself and you will succeed. And do not forget to share photos of your haircuts in the comments.

How to choose a clipper

Any simple or model men's haircut begins with the purchase of a typewriter. This seems like a simple truth, but in fact, in the world of hair cutting mechanisms, it's easy to get lost - so many models are represented in each row. Understanding the assortment will help the division of all devices into three main types of operation.

Vibrating typewriter

This type of equipment belongs to the most economical and noisy. In addition to sound, the payment for a small cost will be a small power - up to 15 watts and a short duration of continuous work - up to 20 minutes. At the same time, the clipper will independently say when it gets tired, simply by turning it off. For the above reasons, the specialists will not cut the hair with such a machine, and by the end of the day, the hand would be tired of the strong vibration that distinguishes such a device.

There is another reason why a haircut with a machine at home can be disappointing with an economical device - these are fixed knives that are difficult to care for. Among the more expensive models of this series there are semi-successful successful options, like the Oster 616, which solved this problem easily and elegantly.

Rotary hair clippers

Trimming with a rotary type machine is more pleasant because of the reduced vibratory background, and a strong engine ensures uninterrupted operation of the device for more than one hour. The device is convenient both for experts and for beginners, it almost does not vibrate in a hand, but on weight it is much more capacious than vibration.

Included with the model and separately, there is a large number of nozzles, with the help of which any male hairstyles are formed. Hair density and stiffness do not matter - any men's haircuts with this type of machine are equally good.

Battery Clippers

One of the easiest and fastest devices and costs, of course, appropriately. In addition, the power of such models is carried out both through the battery and through the network - a great advantage with the painstaking male haircut machine, especially for a beginner. The knives in the device change with the speed needed by the professionals, and the weight of the device - within 150 grams - makes it a toy compared to the previous categories. You can trim, trim the hair with this battery mechanism both for yourself and any other person.

What you need to know, starting to cut

It is better to start the career of a master in men's haircuts with a typewriter at home, with the formation of the most elementary models - boxing or half-boxes. The diagrams of both models are characteristic of sporty style, that is, they imply a shortened neck and temples and an elongated crown. How to cut, you can understand only by catching the essence of what should be the result, and this requires no haircut under the machine.

Trimming a man with a machine in the absence of experience, no need to rush and strive to start the device, just as the “client” took the chair. Perhaps before that, your vis-a-vis had a model haircut and to redo this beauty you first have to use scissors. Below is a fairly complete step-by-step instruction for those who do not agree to be able to cut only bald.

Men's haircut step by step

The simplest men's haircuts for a typewriter begin with the removal of excess length and only then - from work, directly, with the device. Step-by-step instructions on how to cut a man are as follows:

Hair is cut both dry and moistened from a spray bottle - as it is convenient for the master, but first you need to comb them well. The technology of length removal is simple - using the middle and index finger of the left hand, as a clip, we pass a small strand of hair between them and slightly tighten it by 90 0 relative to the head. Cut off as much as necessary for the hair and then on the entire area of the head, achieving a relatively short haircut,
Haircut for men is made against hair growth, starting from the back of the head. It is very important to determine the area of the border, which is well demonstrated by the video tutorials for beginners - right up to this border and you need to move, overcoming the short distance of the back of your head with tiny steps, so as not to cut too much,
Edging is made in different ways, as you can see, looking through the step-by-step lessons. With a hairstyle in the style of "military", the back of the head is often shorn bald, then the edging will be appropriate. Make sure that with the transition to the next length, the border does not appear too clearly. In this regard, it is much easier to cut men's hairstyles than women, due to the smaller amount of hair,
The transition to the edging is done with the nozzle No. 2, on the crown - with the nozzles No. 3 or No. 4,
How to cut a type of whiskey with a machine is more difficult, because the temporal lobes are visible from almost any head rotation, and the bad experience of the novice master will immediately become obvious. Let the “client” independently decide which temples to leave for him, and your task is to cut the man for the first time at least in such a way that he will not be frightened. The basic rules for the formation of oblique and straight temples can be found in the video, but the main principle is caution and movement with the device, literally one millimeter.

Using a razor, after the haircut is finished under the machine, is the final touch of the process, but such a trimming stage is required only if the hairline on the back of the head drops too low on the neck and it does not look aesthetically pleasing. Take a simple one-time machine and remove the ugly growing hairs and the stiff bristles below the hairline.

How to get a haircut on your own

How to cut yourself, if you turn to outside help there is no possibility, and the machine and the desire to learn how to do without a hairdresser is available? If you have not yet decided on a hairstyle, remember that boxing halfboxing going to most male representatives is a men's haircut with a typewriter that is contraindicated to bright blonde people who, with short haircuts, will create a bald feeling and those who have focal hair thinning on their heads. The latter category of men are often advised to either grow their hair to a classic length or to shave their heads baldly.

So, step by step instructions for those who shave their own:

Wash your hair and dry it well. Medium length strands must also be combed well,
If you already had the opportunity to cut a man with a typewriter, then it would not be difficult to transfer the same actions to yourself. First, prepare the device by wearing the knife that matches the desired bang hair length. Then sit near the mirror with the mirror and immediately prepare the second mirror on the stand, so that later it would be convenient to cut yourself with a machine from the back of the head,
Try to do without scissors even with long hair - it is inconvenient when self-cutting. In the extreme case, if the appliances fail, and the device cannot remove the required length in one go, decorate the hairstyle at the maximum head first, and only then adjust the desired length,
Lift the device with the attached attachment to the roots from the side of the bang and, moving the device towards the crown, run the first track along the central device, without deviating to the right or left side. The following tracks will be held alternately to each ear, adhering to the angle of inclination of the knife, at which the nozzle is constantly in close contact with the head,
You can trim yourself with a typewriter on the back of your head, you can use the second mirror, a smaller one, in which you need to look in such a way that you can always see the whole head and neck in the main mirror. Do not immediately try to organize smooth transitions without changing the length nozzle - process the back of your head with a small knife before edging, attach the desired length to the hairs on the temples and around the ears and only then, using knife number 2 or number 3, soften the boundaries of the transitions wherever necessary.

Important! It is desirable, at the final stage, when a razor is used and the neck space under the nape is drawn out of the head, to seek the help of a third person.

How to cut hair at home - step by step instructions

Today, any girl who wants to change her hairstyle can turn to a hairdresser, but this is not always possible - for some, the price of services is too high, and someone simply does not have enough time. There is a third type of people - experimenters who want to do the procedure themselves.

In any case, whatever the reasons, learning how to cut your own hair is always interesting and practical - both time and money will be saved, and if you learn to do everything correctly, then the results will always cheer you up.

Learn to cut it yourself - save time and money!

Before you cut your hair at home, read the following guidelines, they will help you avoid unpleasant surprises:

Buy sharp high-quality scissors specifically for haircuts, ordinary scissors that we use in everyday life can be blunt, because of which the hairstyle will be spoiled. Also prepare hairbrushes and brushes of different shapes and sizes, in the future they will help you not only to create haircuts, but also in modeling hairstyles.

Without good scissors you are unlikely to have a good haircut.

If you can, then buy a machine that is especially useful for men's haircuts. Hairpins, clips, hairpins, hair dryer with high power, water spray - all this will need a novice hairdresser.

In the process of studying, haircuts are initially better performed on close people, preferably male.. Firstly, all the mistakes can be easily corrected with the help of a typewriter, and secondly, men are not so worried about their appearance compared to women.
Starting haircuts should always be moistened with curls with a sprayer or with their washing.. Comb the head of hair carefully from tip to tip.
Do not immediately proceed to complex haircuts. It is better to immediately learn how to cut the ends of hair at home, because the reduction in length is the simplest procedure.
Complicated haircuts require dividing the hair into two temporal, upper and lower occipital.
Don't cut a lot of hair right away.. The stock is needed so that errors can be corrected by adjusting the required length.

Practice on your son or husband, because close people will not be offended if something goes wrong

The technique of cutting is as follows: a well-combed and moistened strand secure between the middle and index finger. Adjust the length that you want to cut, and follow the same sequence with all the strands.
If you are going to cut curly hair, then you need to cut the length with a margin, because after drying your hair will instantly jump.

You do not know how to cut the ends of the hair at home, below is a step-by-step procedure:

Cutting off the tips is the simplest procedure; start your practice with this very thing.

From the sprayer, thoroughly moisten the hair - so it becomes perfectly smooth and straight, which allows you to follow what needs to be cut. Carefully comb the curls. Please note in advance that wet strands are always slightly longer than dry ones, so make a reserve.
Use the ruler or tape measure to determine how long you want to remove.
Separate the hair in the middle part. In the front, take one strand - you will be guided by it in the subsequent course of work, and fix it between the middle and index fingers, cut the predetermined length. Be sure to follow - whether smooth cut.

Then proceed to trim the next strands, until you have done a full haircut in a circle. Always follow the first strand.

After that, carefully comb the hair and inspect - whether there are any irregularities. If there are errors, be sure to correct them.

If you cut curly hair, then it must be divided by a straight part, and cut off below the desired length.

Trimming thick or hard hair, separate the small strands so that everything is done perfectly smoothly.

How to cut hair at home to make a cascade - this is the question many girls who like to experiment ask. We want to note right away that it will take a lot of time and effort to create such a hairstyle, but if everything is done correctly, then you will succeed.

Comb the curls, decide on the size of the cap - it depends on where you cut the haircut.
Separate a small strand take it in your left hand. In the right hand, take the scissors and direct their tips to the bottom. That is, trimming the hair will be from top to bottom.
With light pressure on the handle, slowly drive along the length of the strand. Do everything smoothly, as if gliding over the curl. It turns out that cutting the hair in a diagonal direction, you remove only part of the strand. Watch your movements so you don't accidentally cut the curl completely.
After the ends of the scissors reach the end of the strand, proceed to the next one, doing the same.

Photo: demonstration of non-standard cascade trimming

There is another interesting way to cut your hair in a cascade at home.

The bottom line is to comb the entire head of hair in front of you and collect it in the tail, so that it is practically on the forehead. Determine how long you want to cut, and measure it with a ruler. By the way, by the way, measure your tail several times so that there are no errors.

Fix the tip of the beam in your left hand, and take the scissors in your right hand and carefully remove the extra length. Profile the cut so that everything looks as natural as possible. Dissolve the hair.

Voila! Cascade is ready! Comb the hair and inspect the hair, if something does not suit you, then trim or additionally profile the curls.

Having resorted to this non-standard method of cutting, do not shear the tail with a flat horizontal line, with a tip of scissors, give a different length and shape to the strands.

Having learned to remove the length, you probably want to learn how to cut and bangs.

The procedure is as follows:

Trim perfectly smooth bangs no difficulty

Separate with a parallel parting a part of the hair, which will be the bang. Adjust its thickness and width, which should be equal to the width of the frontal part.
Secure the remaining curls with a rubber band or clips so that they do not disturb you.
Now wet the bang and visually determine its length, about a line slightly lower than the eyebrows, begin cutting.
Hold the scissors at a 45⁰ angle, this allows for a soft slip of the blade. Cut from the left side, gradually moving to the right.
Comb a new bang with a comb for combing hair. Look around, if there are any kinks, then correct them by holding the scissors at a 90⁰ angle.

Optionally, you can profile your bangs.

The video in this article will demonstrate visually how to carry out different variants of haircuts with his own hands. We wish you success and successful experiments!

As a rule, when speaking of haircuts or hairstyles, they mean women's beautiful short haircuts, while completely forgetting about men's haircuts. But do not think that men's hairstyles are of no interest. Men's haircuts can easily be called multifaceted. There are many varieties of haircuts for men. This is both short and medium, and long men's haircuts.

Everyone wants to look beautiful, but not everyone has time to go to a salon or a hairdresser. However, this is not necessary, you can trim your spouse or child yourself or adjust your own haircut. After reading our article, you will learn how to cut a typewriter.

First of all, you will need a hair clipper. Its main advantage is a relatively small price. Hair cutting machine is quite simple in technique. Professional machine buying optional. Houses can be used and household. You may also need scissors for clipping. You can choose cheap scissors, as long as they are sharp. Even before you know how to cut a machine, you will need to get a good comb. Best of all, if it is with frequent teeth.

How to cut the machine?

Before you start to do the haircut, wash your hair and blow dry it. There are professional machines that can cut wet hair, but with a regular machine it is better not to experiment in this way.

The head should be divided into the occipital region, temporal and parietal. Begin to cut the hair with the occipital region. To do this, put on the machine the largest nozzle in the form of a comb. After the occipital region is trimmed, you can safely go to the temporal, and then to the parietal part of the head.

How to cut with a machine - sharply or smoothly? Everything needs to be done smoothly and slowly. Haste in this case can only go to harm. Move the machine against hair growth, from time to time combing them. The more often you spend the machine on the hair, the better the haircut in this place will be.

In addition, it is important to choose the desired length of hair. If you used a 12 mm nozzle, you need to go to a shorter nozzle to reduce the length. You need this nozzle (9 mm) for the occipital and temporal areas. On these parts of the head, the haircut is performed one more time.

So that the transition to the back of the head almost did not stand out, at the beginning of the occipital region, press the machine as close as possible to the head. After that, rising to the parietal zone, slowly begin to extend the arm, thereby increasing the angle between the surface of the head and the machine attachment. This will allow more smooth transition from short to longer hair.

Then install the smallest comb attachment (6 mm) and trim the hair in the lower part of the occipital as well as the temporal area again. Hair should be combed in different directions, then the haircut will look neater.

Knowing how to cut with a machine will be useful if you want to cut your husband’s house, son or extravagant daughter yourself. Girls also often like to do very short haircuts. This skill is also useful for young mommies, whose little ones cannot stand the hairdresser’s and cannot sit quietly in a chair for a second.

The advantages of cutting children at home

Little boys usually prefer rather short hairstyles. However, it is these haircuts and requires quite frequent correction. After all, it is worth a little hair regrowth, as the head looks untidy.

Regularly drive a child to the hairdresser? To be honest, it's pretty expensive. But that's not the point. Not all children agree to have someone else’s aunt shave them, and some simply categorically refuse to visit the salon and cry at the sight of scissors.

If you have such a case, why not try yourself as a hairdresser? At home, with the mother, the child will feel confident and will easily agree to a haircut. And every time you learn to cut better and better.

What is required for the procedure?

Chair. It will be more convenient if the seat in the chair can be raised higher. Well, or figure out some stand or pillow in the ass.
Cape You can buy it in a grocery store or just use a thin diaper instead.
Comb with frequent teeth.
Scissors. It is better to buy special - hairdressing. They are more suitable for haircuts and have sharp blades. Advanced home hair habits will also require thinning scissors.
Spray bottle with water.
Hair clipper (with nozzles).

Choosing a clipper

So, you have the desire to try yourself in the role of a hairdresser. To bring it to life, it is necessary to perform two actions: first, to persuade the husband (son, father, etc.) to experiment, and second, to buy a clipper. Persuasion requires an individual approach, and with the purchase of a working tool everything is simpler, because the machines are divided into only three types:

Vibration. Low cost, perhaps the only plus of such models. The main disadvantages are noisy work, power limitation up to 15 watts, hands are very tired of vibration, it is difficult to care for fixed knives of the device. Yes, and the time of continuous operation of the vibration machine rarely exceeds 20 minutes - that is why such units are mainly used for cutting at home,
Rotary. They practically do not vibrate, they are easy to use even for beginners, although they are heavier than vibration models. The power of the rotary clippers allows you to work without interruption for more than an hour,
Rechargeable. Professionals appreciate them for the ease and speed of haircuts, the ability to work from the network, as well as autonomously, through the battery. From the instructions it is clear that changing knives on such a machine is a matter of seconds. But for rare haircuts at home, the devices are expensive, this is the only negative.

Choosing a machine for use at home, you should not buy the most expensive model - perhaps you will soon realize that the haircut is clearly not your path, and the costs will not be justified. The best ratio of price and quality have rotary devices or vibration, declared by the manufacturer as "semi-professional".

In addition to the device itself, do not forget to buy the rest of the necessary equipment: hairdresser’s scissors, a regular flat comb, a hair dressing gown. At home, these items are stored on a separate shelf and are used strictly for the intended purpose, because we are talking about personal hygiene.

Step-by-step instruction

A skillful haircut machine with skillful use will help create 4 hairstyles: boxing, halfbox, hedgehogand"zero". The last kind of special hairdressing does not require, as it is performed with one nozzle. The remaining models involve step-by-step haircut with a change of different attachments. They are more complex, but regular practice in the male half of the family will help to get a hand even at home.

Discuss in advance with the man exactly how his hairstyle should look like in the final result: it is best to choose the photo of the desired model together and focus on it during work. Universal step-by-step instruction for phased haircuts looks like this:

Hair washed with shampoo, dry. Working with wet hair will have a negative effect on the machine blades, they will quickly become dull,
If necessary remove the extra length scissors
Conditionally split head "Client" into 4 parts - parietal, occipital, two temporal,
The haircut is performed step by step against the growth of hair and starts from the back of the headso that the nozzles lift the strands. In these hairstyles, the occipital region is cut with a short nozzle (usually one). Move from the bottom up, that is, from the area above the neck to the crown, in small steps,
The transition from the short clipped part to the elongated part is called edging. This is the most difficult part of the haircut, the rush at this stage is unacceptable. Replacing the nozzle on the "dvoechku", carefully complete the transition. Going higher, again go to a longer nozzle - the top is formed on the "three" or "four", depending on the tastes of the man,
Whiskeyand you can make oblique or straight: the master, just starting at home, it is better to stay on the straight. Length, remove step by step, in several stages. Let it take more time, but less risk of error, and all the flaws of the hairdresser in the temporal zone immediately catch the eye,
Put the nozzle shorter and once again slowly process all transitions lengths Finishing the movement with a brush, take it a little away from the head,
The final stage - the lower part of the temples and neck is processed just a blade.

Sometimes men prefer to wear boxing or hedgehog with bangs - She will have to be cut separately with scissors. On curly hair, it is preferable to give up such an idea - it will be very difficult to even out the transition on your own at home.

Tricks professionals

Haircut machine, made at home, is not visually different from the salon, if the step-by-step instructions were exactly followed and some nuances were observed:

In advance charge the battery cars so as not to be distracted later
Blades of the device before cutting necessarily lubricated with special oil (usually it is included), otherwise the machine will pull hairs,
It is important to keep your hand at the same angle to your head, cutting all its areas,
Do not hurry. At home, you can afford to cut a long and painstakingly. The more you move your hand, removing individual hairs, the neater the result will look,
Step by step compare symmetry haircuts, hair on the left and right should be the same length,
The occipital region of the head may be uneven. To avoid injury and cover up the flaw leave the hair length more than 1 cm,
Step-by-step instruction from hairdressers involves trimming the hairs around your neck, but this technique is applicable only to adult men. In boys, podbrivanie provokes early tightening of the hair structure. In addition, at home shaving is often performed incorrectly, injuring the skin.

As you can see, haircut machine at home is not such a difficult event. After working on the skills of her husband, you can, plucking up the courage to shortly even cut yourself or a girlfriend. Once again, carefully read the step by step instructions, and safely proceed to the experiments.

How to cut?

For each type of haircut, you need to select the appropriate length of hair attachment to get the desired result. When choosing a machine, consider the principle of the device device.

For a home barber shop, it is better to buy a rotary type machine with two modes of switching speeds: it is more reliable in operation. The mode of switching speeds will help to cope with the processing of problem areas: they are better to cut at low speeds.

Nozzles on the machine are fixed and removable. Choose a removable option with hair length adjustment: you will be able to set the length of the haircut without replacing the part in the process. Self-sharpening blades - ideal for a home craftsman: no need to buy new ones, no need to sharpen yourself. Note that dull blades begin to “chew” hair, and this is painful.

Why do you need thinning shears?

In the arsenal of hairdressers there are always scissors with teeth. This tool is used to give a natural hairstyle, smoothing the transition from one length to another, as well as to reduce excessive hair density. They work with thinning shears together with a comb, which lifts hair.

What type of machine is better to choose

Choosing a machine, you need to pay attention to the following nuances:

Cars without wires are very convenient to take on the road.
Pay attention to its weight, too heavy will be inconvenient to work.
It is very good if there are side nozzles in the kit, you cannot do without them when you need to work the area behind the ears.
More efficient in the use of rotary type machines.
Modes of switching speeds are needed to handle problem areas of the head, they are sheared at low speed. For a home format machine, two switching modes are completely sufficient.
Nozzles on the machine can be both removable and fixed. Removable, with adjustable length of hair - the most practical, options for cutting with them are much more.
Self-sharpening blades - the optimal solution, they do not need to sharpen, and you do not need to purchase new ones. Blunt blades “chew” and tear out hair.

Editorial Board

If you want to improve the condition of your hair, special attention should be paid to shampoos that you use.

A frightening figure - in 97% of shampoos of famous brands are substances that poison our body. The main components, due to which all the troubles on the labels are designated as sodium lauryl sulfate, sodium laureth sulfate, coco sulfate. These chemicals destroy the structure of the hair, the hair becomes brittle, lose elasticity and strength, the color fades. But the worst thing is that this stuff gets into the liver, heart, lungs, accumulates in the organs and can cause cancer.

We advise you to abandon the use of funds in which these substances are located. Recently, experts of our editorial staff conducted an analysis of sulfate-free shampoos, where Mulsan Cosmetic took the first place. The only manufacturer of all-natural cosmetics. All products are manufactured under strict quality control and certification systems.

We recommend to visit the official online store mulsan.ru. If you doubt the naturalness of your cosmetics, check the expiration date, it should not exceed one year of storage.

Getting started

There are certain rules that must be followed:

Haircut under the machine is carried out only on freshly washed, dried and combed hair.
Hair clippers always lead against hair growth.
Strands are removed in continuous stripes, starting from the middle of the head.
During the process, the device is periodically shaken, clearing from clogged hair.
When the main haircut is over, they make a fringing using the opposite side of the machine without attachments.

Good advice: it is better to get a haircut for the first time using the largest nozzle. Then, if something does not work out, everything can be corrected.

Before clipping, the head is conditionally divided into 4 parts (see photo): 1 - the lower occipital, 2 - the occipital, 3 - the temporal, 4 - parietal.

Universal

The most elementary haircut. It is carried out without changing the nozzles, even the one who has never had his hair cut will cope with it.

Select the desired hair length and install the desired attachment.
It is better to start from the back of the head, smoothly leading the tool against the growth of hair.
Just cut the temples in the same way, the parietal part of the head is trimmed to the very last.

Men's classic haircut (video lesson).

Boxing and semi boxing

These men's hairstyles are very popular, which is not surprising, because they best emphasize the masculinity and temper of their owner. However, men need to choose them with the correct shape of the skullbecause they emphasize all imperfections. But the structure of the hair and their density are of no fundamental importance.

Boxing. Required tools: machine, razor, comb, thinning and ordinary scissors.

Ordinary scissors draw a line between long and short strands. With the relief of the back of the head, the border is made under it.
Strands that grow below the growth of long hair, shorten using a typewriter.
Make the whiskey and neck as short as possible.
Then go to the crown. You should cut this part by hand, holding the cut hair between your fingers.
When all hair is cut, profile it with special scissors or a razor, pay special attention to the area around the face.
Sticking hair cut off with scissors.

If you intend to leave the bang, make sure that it is not too long (maximum to the middle of the forehead)

Halfbox How to cut:

Hair below the center of the neck cut as short as possible.
The top of the area to be treated should flow along the control line connecting the top of the head to the top of the ears.
At the temples strands cut into one length with the already finished back part.
It is important to make a smooth transition from short to long hair. To do this with thinning scissors or a razor, start smoothing the transition border about a couple of centimeters higher than the control line.
Strands on the crown, cut, holding them between your fingers,
Make easy thinning with scissors or a razor.

Photo instructions for the implementation of the box.

This hairstyle has long become a cult in men. It is executed on toughthick hair. It is a bit similar to a haircut box, however, there is no clearly defined border between long and short strands. The transition between them is smooth, almost imperceptible.

Remove the hair on the crown with scissors, holding it between your fingers, the length should be about 4 cm.
Then put on the hair gel or wax, and put a candle (you can use a hairdryer).
Bang the comb in the direction of the crown.
Process the temporal and occipital zones with a machine, try to make the transition from short strands to long ones as inconspicuous as possible, indistinct.
In the neck, either shave your hair clean or leave it at a minimum.

How to make a haircut hedgehog shown in the video.

This brutal hairstyle will emphasize the classic male features and a strong chin, indispensable for balding and partial loss of hair.

Long hair, which the machine can not take, cut.
Proceed to a haircut on the occipital-temporal zone, and move along three lines: up, down, sideways.
Use a razor to trim the haircut where necessary.

Self-cutting with a typewriter is a great alternative to going to the hairdresser’s, saving time and, ultimately, money. A little practice and stuffed hand, you can move on to more courageous options and experiment.

How to prepare a baby?

And now we are preparing a client. Show him the scissors, tell me what will make him very beautiful. It may even be necessary to convince him that you will cut off quite a bit - some children are reluctant to part with all of their (and hair, including).

The child will have to sit still for quite a long time, and small children are not very accustomed to this. Turn on his favorite cartoon or let someone from the family reads a book with interesting pictures.

In general, have to entertain. Still, you have a VIP client. Also, remember, starting a haircut is best when both the baby and the hairdresser are in a good mood.

A clipper or scissors?

Than to cut your treasure, choose based on their preferences. As a rule, a simple short haircut for a boy is quite easy to do with a machine. If you do not have the skills of a master hairdresser, it is better to make a choice in favor of her. Set the desired length - and forward.

Useful tips on working with the machine:

it is better to choose a hair clipper with the quietest sound, so as not to frighten the baby (there are even special children for sale),
take breaks during the haircut (keep in mind that the machine may get hot from work).

If you want to feel like a real hairdresser and have at least a little experience with scissors, make a choice in their favor. Scissors work silently, the child will be less afraid, and you can create a more beautiful haircut.

Simple haircut using a single nozzle

Haircut should start from the back of the head. Type in the maximum length and make the first pass.
The machine should fit snugly to the skin. Do not hold it at an angle.
Movement begins from the bottom edge of the hair - from the neck up. The first pass is performed in the center of the head, the next - on the left and right of the central passage.
Thus process the entire occipital part of the head.
The next step is cutting the sides. When processing the whiskey, gently turn down the ears, do not rush.
If the child behaves calmly, in the end, you can make a border Remove the nozzle and walk around the edges of your hair. Decorate whiskey and bangs.
If you want to leave the baby a long bang, you have to cut it with scissors.

As you can see, cutting a child with a machine is quite simple. Using just one nozzle, you can quickly make a beautiful and neat haircut to your son.

Haircut using two nozzles

If the soul asks for a style and a more creative haircut, you can make the hair “hat” using two different nozzles.

First, cut the entire head in the manner described above using the nozzle with the maximum length.
Now take a shorter head and trim her hair, starting from the very bottom and ending around the middle of the head.
To the border between different lengths of hair turned out to be smooth and beautiful, comb the hair up and decorate the transition from short hair to "cap".
Bangs with this hairstyle usually leave quite long.

A slightly more complicated version of the haircut machine is shown in the following video:

We trim the kid with scissors: step by step instructions

If, in the case of working with a machine, your baby should have dry hair, it will be necessary to wet them with a scissor cut. Sprinkle hair with a spray bottle.

By the way, there is every chance that the child will really like this toy. Give him and you a sprinkle - and the mood will rise, and the haircut will cease to frighten the wary child.

Simple children's haircut

Slightly tilt the child's head forward and comb the hair over the neck. After selecting the desired length, stop the comb on it, turning it towards you. Now clamp a strand of hair between the middle and index fingers and - cut. Cut strictly in a straight line.
Note that after drying, the hair will rise a little and will look shorter.
So do the edging - cut the hair to the desired length behind and behind the ears.
Now proceed to the haircut the rest of the hair. Take a control strand and cut, leaving the desired length. Then take a small strand and, clamping each between the fingers, cut, focusing on the control strand.

All strands should be the same length.

This is the easiest haircut, it is performed fairly quickly and does not require special skills. Due to its simplicity, it is great for very young boys.

Older gentlemen and with thicker and longer hair are already entitled to a more complex hairstyle. For example, you can try to cut the boy with a “cap” or make a haircut with a smooth transition of length.

Classic haircut

Before the onset of the growing up period, children's hair remains rather thin, which is why a classic haircut with a voluminous top and parietal part, and a shorter nape, is very suitable for them.

Slightly wetting your hair, divide them into two parts. Draw a line from one ear to the other, passing through the back of the head. If the baby's hair is long, the selected upper part of the hair can be fixed at the top of the head with special hairdressing clips.
Now we are determined with the length of the lower part of the hair. On the back of the head, select one strand and cut the hair to the desired length - this is called the control strand.
All other hairs in the occipital area of the head are clipped, focusing on your control strand, gradually reducing their length to nothing.
This is done as follows: starting from the intended line and moving towards the neck, select the strand (not across the head, but along, making parallel partings) and cut off the extra length. The length of the hair as it approaches the neck should decrease, gradually fading away.
The next step is cutting the whiskey. Separate the hair of the temporal area from the rest. Now cut a piece of hair over your ear. Be careful.
Then cut the entire temporal part of the hair strand by strand - separating each strand with your fingers and focusing on the control one (above the ear).
In the end make the edging of the temple.

In the same way cut the second temple.
Do not forget about edging the head. Carefully cut off any excess hair, keeping the scissors parallel to the hairline around your neck.
Getting to the hairstyle of the parietal part. Select the control strand in the center. Trimming it, you should be guided by the length of the hair in the back of the head.
Strand by strand cut the entire parietal zone. Do not forget about bangs - after making out its length, you need to carry out a fringing.
Finally, using thinning shears, profile the entire hairstyle. Just take a hairbrush strands and make out special scissors. Special knowledge is not needed - the shape of the scissors effectively works itself.

Now it remains only to comb and lay the hair, after which, provide the young dandy with a mirror so that he appreciates his unearthly beauty.

We cut the baby at home using scissors and a typewriter

If you already own the simplest methods of working with hair, we suggest that you try more complex techniques. Having watched the following videos, you will learn how to make a fashionable attractive haircut for your son using a typewriter and scissors:

Rules for choosing a haircut for a boy

Parents of even the youngest children want their siblings to look fashionable and beautiful. In our time, model hairstyles for boys are quite common, and this is just wonderful. Stylish looks are not only for girls, right?

Let us give ourselves a few recommendations for parents choosing a new haircut for their son.

Consider the quality of the baby’s hair and face type.

We have already mentioned that rather thin hair is inherent in small children. Do not worry - the baby will grow up and his hair will become stronger and thicker. For now the hairstyle creating small volume will approach it more.

You also need to consider the type of person. For example, the hedgehog haircut is suitable only for happy owners of the ideal head shape. And the elongated haircuts like “square” do not go very well for strong guys with rounded cheeks.

Hairstyle must be age appropriate

On very young boys, model haircuts, Iroquois, clipped temples and “hair tattoo” can look vulgar. For such a baby is ideally suited the simplest hairstyle, cleaning the extra length.

Head Zones

Before you make your first haircut machine, you need to familiarize yourself with the division of the head into work areas. In the art of hairdressing, it is common to divide the surface to be processed into the following areas:

parietal zone (interior),
temporal-occipital zone (exterior),
separation zone.

The interior is a bang and the upper part of the head. When cutting should take into account the direction of hair growth. The hair of the temporal-occipital part descends, however, the direction of growth also varies. The separation zone is the boundary between the parietal and occipital-temporal region. The growth direction is down.

Rules of work

To prepare the hair for work, it is necessary to wash and dry them well. Then using a comb to lay in the direction of growth.

Important! Comb hair stacked in the direction of growth, and the machine removed in the opposite direction - against growth.

The machine works only with dry hair.
Movement should be smooth, directed against the growth of hair. If you sharply remove the machine from the hair, you can hurt a person: hairs will remain in the blades between the teeth.
Strands can be raised using a comb with frequent teeth.
The blade should cling tightly to the head and easily slide over the surface.
The hair is removed with a typewriter by strips: first, a central stripe is drawn, then - on the sides of it.

After completion of the main haircut produce fringing. It is made with the inverted side of the device without a nozzle. The desired geometry of the border is made with the help of the teeth of the machine.

CouncilDo not forget to periodically shake the device from the accumulated hair, so as not to interfere with haircut.

The easiest haircut on one length

If you hold the machine in your hands for the first time, start with the most simple male haircut. To do this, you need to install the necessary attachment with the selected length of the slice and gently hold on the head, processing in turn all the zones. First we cut the back of the head, then the temples, in the end - the frontal part of the head.

Council For the first experience with a typewriter, select the nozzle with the longest length (for example, number 11). If you spoil something, you will have the opportunity to fix it.

Haircut with the transition to different lengths

Technique haircut machine implies the following conditions:

You need to start work from the back of the head, smoothly moving from the temple to the parietal zone. The larger the area you cover in one movement, the more beautiful the hairstyle will look. For a hairstyle we take a nozzle with number 9 mm.

Council To gently remove the hair in the temples, work slowly and carefully observe the direction of growth. In this part of the head, they grow in different directions.

Nozzle at number 11 or 12, remove the hair interior. To make the transition from one length to another smooth, slightly raise the blade, not pressing tightly to the scalp.
After processing the bulk of the hair, you should replace the nozzle with a smaller one and re-treat the temples and the back of the head, forming a short cut of the border.

Important! You can not change the angle of the machine in the process of cutting.

Haircut Boxing

Haircuts Boxing and Halfbox are considered very stylish, although they belong to the category of sports hairstyles. They are perfectly combined with different styles of clothing, in which their versatility is manifested. This hairstyle is suitable for hair of any structure and thickness. However, the shape of the skull for this haircut should have perfect outlines, because the hairstyle reveals all the defects.

To work you need a machine with nozzles at number 3 and 1.

Interior clean technique "under the fingers."
The temporal-occipital region can be cut down to the frontal part at will.
The transition line from one length to another can be corrected with scissors.
The bangs are trimmed either along the spit or at a height of 2-3 cm from the eyebrow line.

To get Poluboks, you need to remove the interior of the nozzle with the number 4. Also, in relation to the bangs are allowed various variations. If you remove the machine all the hair, except for bangs, get a haircut Bangs.

Haircut Hedgehog

At first glance, the Hedgehog may resemble a haircut Box, however, there is a fundamental difference. If in Box the transition between different lengths is contrasted, then the Hedgehog is drawn up with a smooth transition from long to short hair. This type of hairstyle is only suitable for thick dense hair.

First, remove the long hair "on the fingers" in the region of the crown, leaving the length within 4 centimeters.
Then the hair is applied to the hair styling (gel or wax) and fixed their hair dryer in an upright position.
Bangs off in the direction of the crown and fixed with a stream of air.
Temporal-occipital region is treated with a machine to the line of the separation zone. The transition from the interior to the exterior is done by performing overlapping strips: we grab a bit of the treated surface with the raw one together.
Edging in the neck or nullify, or leave a minimum of hair.

Council Gradually reduce the length from 4 cm in the interior zone to one centimeter in the back of the head, regularly checking the quality of the haircut with a hair dryer.

Zero haircut

Universal haircut for all occasions. Suitable for men with regular features, strong-willed chin and a beautiful form of the skull. In cases of rapid hair loss, this type of haircut is literally the way out. For work you need a machine with a nozzle at number one, as well as a safety razor and a comb.

We remove long hair with scissors.
Shave machine first occipital-temporal part in three directions: vertical, horizontal and diagonal.
In conclusion, adjust the haircut with a safety razor.

How not to leave bald spots?

Nowadays, haircuts with a pattern that is cut with scissors or a typewriter have become fashionable. Looks beautiful!

However, with the sloppy work of the machine, you can accidentally leave the bald patch on the hair. This can happen if you:

bad combed before cutting,
wet hair and not dried,
don't wash your hair before work
tried to make a pattern on the hair with a nozzle.

Badly combed hair can clog the blades of the nozzles, which will cause the hairline to form or cause pain (the machine will tear the hair).

On wet hair do not hold a haircut machine. Blades get dull quickly, and this is fraught with various surprises at work.

If you do not wash your hair before cutting, the sebum will clog the blades, respectively, trouble can not be avoided.

Pattern on the hair at home is better not to do. The consequences of this experiment will have to be removed with a zero haircut.

In order not to make mistakes when cutting hair, watch the training video:

Tip 1: How to cut a men's haircut machine

At present, a wide range of electric hair clippers has appeared on store shelves. They are presented in a different price range and from different manufacturers. But all hair clippers are designed for one common purpose - men's haircuts at home. At home you can make a haircut no worse than in the salon. Special skills for this will not be required. There are several types of haircuts.

Instruction

You can cut all the hair with one size of the nozzle, holding the machine against the growth of hair. Process whiskey and neck area without attachments, turn the machine towards the hair. This will be the easiest haircut.
In order to make a more complicated haircut related to the model classification, set the desired length of the nozzle No. 1 or No. 2. Hold the typewriter blade up. Start the haircut from the neck with the start of hair growth. Cut it in this way to the back of the head.

Change the nozzle to # 3 or # 4 and cut to the top of the head. Next, change the nozzle to the number 1 or number 2 and cut the hair at the temples. And again put the number 3 or number 4 and cut from the temples, directing the machine to the crown.

Then from the crown, drive the machine against the growth of hair towards the crown. If cut in the direction of hair growth, they will be different in length.

You can use a comb when cutting and cut hair over it.

Always start your haircut from the back of your head.

The final procedure is to trim the hair on the temples and neck. To do this, remove all attachments, turn the machine in the direction of the hair and trim the temples and neck.

For a cone-shaped haircut, install the nozzle No. 4 and cut from the back towards the crown. Then cut against the hair growth from the front and sides. To get a flat top, you need to raise the hair with a comb and cut along the comb.

For a successful haircut you need to cut clean, dry hair.

After each haircut, you need to shake off the hair with a special brush. Blades need to lubricate the oil, which comes in a set with the machine.

6 types of hairstyles that are suitable for young children

Most mothers can not cut the boy at home, as they are afraid that the child will spin and hurt. But in fact, everything is much simpler than it seems at first glance. Having tried to cut the child several times, since you both get used to it, besides at home everything ends much faster and you don’t have to pay for it.

You can trim the child at home

Neat children's haircut one nozzle machines, step by step

To trim the child at home is quite realistic, and many mothers were convinced of this by their own experience. For work you will need:

Machine and nozzle.
Scissors to fix the error.
Stool on high legs.
Sheet or piece of cloth to wrap the child. This will protect against bristly hairs that fall on clothing.
Comb with fine teeth.
Distracting video or cartoon.

To trim the boy with a typewriter, set him on a chair and cover him with a sheet or cloth so that it covers the body as much as possible from hairs,
Install on the machine that nozzle that is suitable for a specific length of hair,

Install the fitting that fits on the machine.

In each device for a hairstyle there is an instruction with which you can familiarize, and understand what's what,

Turn on the cartoon and explain to the boy that for some time he needs to sit exactly and not turn around,
Comb your hair down, and from the top of your head to the bang,
Turn on the machine and can cut your hair. It should start with the neck, and when you proceed to the front, then from the bangs to the crown,
After completion, cut the bangs and correct the irregularities near the ears with scissors,
Wash your head and show your child what you did.

To cut the boy at home with scissors, add a spray bottle with water to the list of necessary items, with which you lightly wet your hair before cutting and level them for a perfect hairstyle. The principle of operation is the same.

Detailed scheme of the boy's haircut in the photo

Scissors - a sharp object, so carefully watch that the child does not reach out to them, and not hurt.

Leaving the room do not leave them in sight, but rather take it with you, so you will avoid traumatic situations.

Trendy haircuts for boys 1, 2 and 3 years of age

Children aged 2-3 years rarely sit on a mete for a long time, so the haircut should last from 3 to 5 minutes, during which time the original haircut is unlikely to turn out. To cut a child in 2 years, choose the easiest, but beautiful option:

Highlight one side of the hair with the help of a comb and comb it in either direction, cut off the place that was not combed to the desired length, do the same on half from the side where you combed the hair.

The top can be left long or slightly cut and make a thinning

Advice: if a child has a whirlwind from some side, comb the hair in that direction and hide it. For stamina, you can fix the hair with the lightest gel.

You can also trim the boy with a beautiful machine in three lengths. To do this, cut the hair from the bottom with one nozzle, and in two steps, remove only 2 and 4 cm depending on the length and the desired result.

This hairstyle can be worn in different ways.

Tip: if you were able to cut the boy yourself, wash your hair and brush your hair with a comb and a light gel.

To cut a year old boy it is enough to remove all the hairs “under no” using the smallest machine head.

So begin to grow new hair, which with each haircut will become thicker and stronger.

Always stylish classic haircuts

In order to cut a little boy, always use the current classic version that fits any hair structure, head shape and hairstyle.

For this you need:

Slightly wet your hair with a spray bottle and comb it,
Cut the bottom shortly and leave a length equal to the width of your finger with the help of scissors from above.
Make turning at the vises and on the back of the head,
If the child is diligent, you can make a drawing, depending on the skills they come in various difficulties.

If the child is assiduous you can make a drawing

Haircuts for boys machine

It will require a special nozzle.

Such a pattern will not be too complicated and will take from 10 to 15 minutes of time.

Hairstyle for a little boy for long hair

Some parents like to have the child’s haircut at home not only quickly and efficiently, but also stylishly and modernly.

If a child’s hair is long, it is necessary to take care of it twice as long, and accordingly the haircut should be such that it is easy to cope with. Make a short edging, and cut the hair closer to the back of the head with a machine head that is not too short, leave the top, but profile and lay on one side or lift up.

Stylish hairstyle for a boy

To properly cut a boy, appreciate his style, perhaps wishes or character, because all people are individual.

So as not to remove the entire length, simply profile the entire length and cut 1-2 cm.

Filirovka for hair

Modern hairstyles for children with long hair do so to wear them in different ways. The process requires the above listed list of accessories. Before the start of the haircut, you can watch a video instruction or a photo from the Internet to determine the hairstyle.

Comb your hair and put most of it on its side, remove a small part from the smaller side and profile the tips.

We hope the article has become useful for you and you can easily cut your son with scissors or a typewriter. Let the process of work brings you and your baby only pleasure!

Tip 1: How to cut a man at home

Many men do not find the time and money to frequent a hairdresser or a stylist, and shortly cut their hair. In this situation, you can mow your husband or son by spending a little time and achieving the most accurate result with a hair clipper. Using the machine is easy, such a haircut will save you money, and also the machine will allow you to create a neat short hairstyle at home.